Radial Access Systems
Rist™ Radial Access Selective Catheter, Rist™ 071 Radial Access Guide Catheter, Rist™ 079 Radial Access Guide Catheter
Indications for Use
The Rist™ 079 Radial Access Guide Catheter is indicated for the introduction of interventional devices into the peripheral, coronary, and neuro vasculature. The Rist™ 071 Radial Access Guide Catheter is indicated for the introduction of interventional devices into the peripheral, coronary, and neuro vasculature. The Rist™ Radial Access Selective Catheter is indicated for the introduction of interventional devices into the peripheral, coronary, and neuro vasculature. It can be used to facilitate introduction of diagnostic agents in the neuro vasculature. It is not intended to facilitate introduction of diagnostic agents in coronary or peripheral arteries.
Key Specifications
- Single lumen design for all devices
- Radiopaque stainless-steel braid reinforced shaft for Rist™ Radial Access Selective Catheter
- Distal tip shapes for Selective Catheter: Simmons 2 (SIM2) and Berenstein (BER)
- Smooth, rounded distal tip on Selective Catheter
- Braided, tapered shaft visible under fluoroscopy on Selective Catheter
- Luer connector at proximal end for accessories and fluid infusion
- No hydrophilic coating on Selective Catheter
- Lengths for Selective Catheter: 120 cm and 130 cm
- Outer diameter (OD) for Selective Catheter: 5.5F (0.070” / 1.78 mm)
- Inner diameter (ID) for Selective Catheter: 0.040” / 1.02 mm
- Compatible radial introducer sheath ID for Selective: 5.5F (0.070” / 1.78 mm)
- Variable stiffness design for Guide Catheters (071 and 079)
- Stainless steel and nitinol reinforced shaft for Rist™ 079 Radial Access Guide Catheter
- Radiopaque platinum/iridium marker band on distal end of 071 and 079 Guide Catheters
- Hydrophilic coating on distal 25 cm of 071 and 079 Guide Catheters to reduce insertion force
- PTFE-lined lumen on 071 and 079 Guide Catheters to reduce friction
- Embedded stainless-steel flat wire cross coil in proximal section of 071 Guide Catheter, transitioning to nitinol round wire single coil in distal end
- Lengths for Guide Catheters: 95 cm, 100 cm, 105 cm
- Outer diameter (OD) for 079 Guide Catheter: 7F (0.093” / 2.37 mm)
- Inner diameter (ID) for 079 Guide Catheter: 0.079” / 2.00 mm
- Outer diameter (OD) for 071 Guide Catheter: 6F (0.087” / 2.21 mm)
- Inner diameter (ID) for 071 Guide Catheter: 0.071” / 1.80 mm
- Compatible catheter OD: up to 6F for 079, 5.5F for 071
- Materials: Polyether Block Amide (PEBAX) and BaSO4 for catheter body
- Stainless steel coil (proximal) and nitinol wire coil (distal) reinforcement
- Polyolefin hub and polycarbonate strain relief
- Supplied sterile, non-pyrogenic, single use only
- Ethylene Oxide (EO) sterilization
- Shelf life: 36 months
- Includes radial access dilator as accessory for Guide Catheters
- Compatible guidewire: up to 0.038” / 0.97 mm for Guide Catheters
Description
The Rist™ Radial Access Selective Catheter is a flexible, single lumen catheter with a radiopaque stainless-steel braid reinforced shaft, smooth rounded distal tip in Simmons 2 or Berenstein shapes, tapered shaft visible under fluoroscopy, luer connector, no hydrophilic coating, sterile, non-pyrogenic, single use. The Rist™ 079 and 071 Radial Access Guide Catheters are single lumen, variable stiffness catheters with stainless steel and nitinol reinforced shafts, radiopaque distal marker bands, hydrophilic coating on distal 25 cm, PTFE-lined lumens, designed for transradial access and as reinforcing conduits for intravascular devices, including radial access dilator accessory, sterile, non-pyrogenic, single use.