Microcatheters
PROWLER SELECT LP ES Microcatheter
Indications for Use
The PROWLER SELECT LP ES Microcatheter is intended for the introduction of embolic devices and infusion of diagnostic agents into the peripheral and neuro vasculature. The PROWLER XS Microcatheter is intended for the introduction of embolic devices and infusion of diagnostic agents into the peripheral and neuro vasculature.
Key Specifications
- 3-zone construction for smoother transitions and enhanced stability
- Variable stiffness, single lumen design
- Intended to access small, tortuous vasculature
- Compatible with guidewires up to 0.014 in. outer diameter
- Proximal shaft reinforced with stainless-steel braid for pushability
- Distal shafts reinforced with Platinum/Tungsten coil for flexibility
- Hydrophilic coating on distal 30 cm for lubricity
- Usable length: 150 cm
- Tip shapes: Straight, J, 45-degree, and 90-degree
- Inner diameter: 0.0165 in.
- Outer diameter: 2.3F / 1.9F
- Hub material: Grilamid
- Shaft braid: Stainless-steel
- Distal tip radiopaque marker: 1 or 2 Pt-W coils
- Accessories: Shaping mandrel
- Sterilization method: Ethylene Oxide
- Shelf life: 27 months
Description
The PROWLER SELECT LP ES and PROWLER XS Microcatheters have a 3-zone construction that enables smoother transitions to enhance the stability of the microcatheter. The microcatheters are variable stiffness, single lumen catheters designed to access small, tortuous vasculature. The maximum outer diameter of a guidewire that is allowed inside the subject microcatheter is 0.014 in. The proximal shaft is reinforced with a stainless-steel braid to aid in pushability. The distal shafts are reinforced with a Platinum/Tungsten coil to provide flexibility. To provide lubricity, the distal 30 cm of the catheter is coated with a hydrophilic coating.