Radial Access Systems
RIST Radial Access Catheter
Indications for Use
The RIST Radial Access Catheter is indicated for the introduction of interventional devices into the peripheral, coronary and neuro vasculature. It can be used to facilitate introduction of diagnostic agents in the neuro vasculature. It is not intended to facilitate introduction of diagnostic agents in coronary or peripheral arteries.
Key Specifications
- Flexible, single lumen catheter
- Compatible with 0.035 inch and 0.038-inch guidewires
- Radiopaque catheter shaft reinforced with stainless steel braid
- Luer connector at proximal end for attachment of accessories and infusion of fluids
- Distal tip: smooth, rounded
- Distal segment shapes: Simmons 2 (SIM2) and Berenstein (BER)
- Nominal outer diameter: 0.070 inches (5.5Fr)
- Nominal inner diameter: 0.040 inches
- Working lengths: 120 cm and 130 cm
- Hydrophilic coating: Yes
- Visibility under fluoroscopy: Yes
- Materials - Outer polymer jacket: Polyether Block Amide (PEBAX) with BaSO4
- Materials - Inner polymer layer: Polyether Block Amide (PEBAX) with BaSO4
- Materials - Strain Relief: Polyolefin
- Materials - Hub: Polycarbonate (Makrolon)
- Compatible with RIST Cath Radial Access Long Sheath (K191551) and off-the-shelf accessories
- Supplied sterile, non-pyrogenic, single use only
- Packaging: Pouch and Carton
- Sterilization: Ethylene Oxide
Description
The RIST Radial Access Catheter is a flexible, single lumen catheter compatible with 0.035 inch and 0.038-inch guidewires. It is designed to deliver interventional devices into the peripheral, coronary, and neuro vasculature, facilitate introduction of diagnostic agents in the neuro vasculature, and is intended to provide access to the target site via transradial access. The RIST Radial Access Catheter consists of a radiopaque catheter shaft reinforced with stainless steel and has a luer connector at its proximal end for the attachment of accessories and the infusion of fluids. The distal tip of the catheter is shaped to have a smooth, rounded tip and is offered in two different distal segment shapes, namely Simmons 2 (SIM2) and Berenstein (BER). The catheter has a nominal outer diameter of 0.070 inches and a nominal inner diameter of 0.040 inches. It is available in two working lengths: 120 cm and 130 cm. The RIST Radial Access Catheter is compatible with the RIST Cath Radial Access Long Sheath (K191551) and off-the-shelf accessories. The RIST Radial Access Catheter is supplied sterile, non-pyrogenic, and intended for single use only.